Program
Let yourself be inspired by top-class keynote speeches and trailblazing specialist presentations. Use the breaks and the evening event for in-depth discussions and to make contacts away from “day-to-day business”.
to
CHASSIS.TECH SECTION − Palaishalle
DRIVING SIMULATORS
Dr. Alexander Heintzel
Editor-in-Chief ATZ | MTZ Group, Editor-in-Chief ATZ | MTZ Group, Springer Nature, Germany
to
STEERING.TECH SECTION − Festsaal
INNOVATIVE STEERING SYSTEMS
Moderation
to
BRAKE.TECH SECTION − Fürstensalon
BRAKE SYSTEMS AND CONTROL
Moderation
Dr. Falk Hecker
Vice President Engineering Brake Control, Knorr-Bremse Commercial Vehicle Systems GmbH, Germany
to
TIRE.WHEEL.TECH SECTION − Königssaal
TIRES AND WHEELS AND THE ENVIRONMENT
Moderation
Ralf Schweizer
Head of Development Wheels, Tires, Tire Pressure Monitoring Systems, AUDI AG, Germany
Comparison of real-time capable multi-body simulation models and map models on the dynamic driving simulator
Robert Schurmann
Simulation Engineer Wheel Guidance System and Vertical Dynamics, Volkswagen AG, Germany
Coauthors: Nils Harendza, TRE GmbH, Germany; Benjamin Rieff, cosin scientific software AG, Germany; Prof. Dr. Alexander Lion, Institute of Mechanics, Universität der Bundeswehr München, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session:
DRIVING SIMULATORS
Alternative HMI's in steer-by-wire vehicles
Thomas Maier
Test Engineer Vehicle Dynamics & Testing, thyssenkrupp Presta AG, Liechtenstein
STEERING.TECH SECTION
–
Festsaal
Session:
INNOVATIVE STEERING SYSTEMS
Roadmap to act-by-wire
Dr. Michael Kunz
Vice President Engineering Platform Brake System and Software, Robert Bosch GmbH, Germany
Dr. Dominic Neumann
Senior Project Lead, Robert Bosch Automotive Steering GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE SYSTEMS AND CONTROL
Wheel sustainability and performance label
Coauthors: Iosef Fanizza, Ralf Duning, Maxion Wheels Holding GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRES AND WHEELS AND THE ENVIRONMENT
Virtual scene generation: developing, testing, and validating autonomous vehicle functions
Tim Rothmann
Senior Scientist, Dynamics, Loads, and Environmental Data, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
Coauthors: Jürgen Frank, Dr. Johannes Schwank, Dr. Michael Burger, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session:
DRIVING SIMULATORS
Presentation of a steer-by-wire force feedback actuator with a direct drive e-motor and MR brake
Matthias Niegl
Senior Engineer, Vehicle Dynamics, MdynamiX AG, Germany
Coauthors: Johannes Hendewerk, MdynamiX AG, Germany; Matthias Becker, CC Vehicle Dynamics, Hochschule Münnchen University of Applied Sciences, Germany; Stefan Battlogg, INVENTUS Development GmbH, Austria; Matthias Holzleitner, STIWA Group, Austria
STEERING.TECH SECTION
–
Festsaal
Session:
INNOVATIVE STEERING SYSTEMS
Electromechanical brake systems – architectures and applications
Martin Baechle
Director System Development Future Brake Systems, Continental Automotive Technologies GmbH, Germany
Coauthors: Timo Schröder, Dr. Mathias Haag, Dr. Thorsten Ullrich, Continental Automotive Technologies GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE SYSTEMS AND CONTROL
Analysis of airborne and non-airborne tire road wear particles generated by a vehicle
Frédéric Biesse
Senior Fellow for Tire Physics and Modelization, Manufacture Française des Pneumatiques Michelin, France
Coauthors: Pierre Schaal, Manufacture Française des Pneumatiques Michelin, France
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRES AND WHEELS AND THE ENVIRONMENT
Driver-centric development leveraging on remotized hardware-in-the-loop and dynamic simulators
Lecture was cancelled at short notice. Please attend one of the parallel strands.
Alessio Anticaglia
PhD Student, Meccanica 42 S.r.l., Italy
Coauthors: Claudio Annicchiarico, Meccanica 42 S.r.l., Italy; Giuseppe Massimiliano Raimondi, Andrea Spicuglia, Maserati S.p.A., Italy; Alessandro Baldari, VI-grade S.r.l., Italy; Renzo Capitani, DIEF, University of Florence, Italy
CHASSIS.TECH SECTION
–
Palaishalle
Session:
DRIVING SIMULATORS
Conception and prototypical implementation of an integral steering and drive module
Torben Dittmar
Managing Chief Engineer, Institute for Automotive Engineering (ika), RWTH Aachen University, Germany
Coauthors: Prof. Dr. Lutz Eckstein, Institute for Automotive Engineering (ika), RWTH Aachen University, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
INNOVATIVE STEERING SYSTEMS
ABS exploiting forces at the wheel – a motorsport investigation
Prof. Dr. Giampiero Mastinu
Full Professor, Department of Mechanical Engineering, Politecnico di Milano, Italy
Coauthors: Prof. Massimiliano Gobbi, Massimiliano Milivinti, Department of Mechanical Engineering, Politecnico di Milano, Italy; Carlo Cantoni, Brembo S.p.A., Italy
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE SYSTEMS AND CONTROL
Tire wear particle evaluation
Dr. Benjamin Oelze
Head of Test Method Development Tire Wear, Continental Reifen Deutschland GmbH, Germany
Nadine Aschenbrenner
Test Engineer – Global Tire Testing, Wear, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRES AND WHEELS AND THE ENVIRONMENT
Refreshment break with coffee and tea in the exhibition area
to
CHASSIS.TECH SECTION − Palaishalle
ARTIFICIAL INTELLIGENCE
Moderation
Martin Schwarz
Head of Development Steering Gear Upper Midsize Class, Luxury Class, Rear Axle Steering, BMW Group, Germany
to
STEERING.TECH SECTION − Festsaal
DEVELOPMENT PROCESS AND STANDARDIZATION
Moderation
Dr. Christoph Bittner
Director Development Vehicle Dynamics Systems, Dr. Ing. h.c. F. Porsche AG, Germany
to
BRAKE.TECH SECTION − Fürstensalon
SIMULATION AND TESTING
Moderation
Prof. Dr. Rüdiger Tiemann
Head of Chassis and Vehicle Dynamics, Automotive Engineering, htw saar – University of Applied Sciences, Germany
to
TIRE.WHEEL.TECH SECTION − Königssaal
TIRE TESTING AND SIMULATION
Moderation
Prof. Dr. Andreas Wagner
Holder of the Chair of Automotive Engineering, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany
Exploring the limits of driving stability using reinforcement learning for vehicle dynamics simulation
Dr. Mark Wielitzka
Senior Technical Consultant Software & Function Development, IAV GmbH, Germany
Coauthors: Markus Knaup, IAV GmbH, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session:
ARTIFICIAL INTELLIGENCE
Standardization for a steer-by-wire vehicle
Alexander Ein Waldt
Technical Expert Steering Systems, Ford-Werke GmbH, Germany
Coauthors: Götz-Philipp Wegner, Oliver Nehls, Ford-Werke GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
DEVELOPMENT PROCESS AND STANDARDIZATION
Implementation of a real-time ESC simulation environment into a dynamic driving simulator (SiL/DiL)
sangmin Park
Principal Investigator Dynamics Concept Development Team, Hyundai Motor Company, South Korea
Coauthors: Matthias Niegl, Tobias Tarne, MdynamiX AG, Germany; Prof. Bernhard Schick, Institute for Driver Assistance and Connected Mobility (IFM), Kempten University of Applied Sciences, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
SIMULATION AND TESTING
Influence of tire deformation on vehicle aerodynamics
Johannes Burgbacher
Research Associate, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany
Coauthors: Prof. Dr. Andreas Wagner, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany; Dr. Timo Kuthada, Dr. Felix Wittmeier, Research Institute for Automotive Engineering and Powertrain Systems Stuttgart (FKFS), Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRE TESTING AND SIMULATION
Innovative kinematic metamodeling: pioneering AI-enhanced suspension tolerance analysis
Alexander Großberger
Research Assistant Virtual Chassis Development, Chair of Automobile Engineering, Dresden Institute of Automobile Engineering, TU Dresden, Germany
Coauthors: Prof. Dr. Günther Prokop, Chair of Automobile Engineering, TU Dresden, Germany; Dr. Maximilian Reisner, AUDI AG, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session:
ARTIFICIAL INTELLIGENCE
SbW development of safety & steering performance avoiding unintended interference
Carsten Maziul
SbW Lead Project Manager, ZF Active Safety GmbH, Germany
Coauthors: Dr. Emad Farshizadeh, ZF Active Safety GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
DEVELOPMENT PROCESS AND STANDARDIZATION
Better together! New testing methodologies for innovative brake systems – applications and benefits
Dr. Felix Pfister
Business Development Manager, IPG Automotive GmbH, Germany
Coauthors: Dr. Matthijs Klomp, Dr. Alessandro Travagliati, Lorenzo Savi, Volvo Car Corporation, Sweden; Barry Purtymun, Carlos Ernesto Agudelo, LINK Group, United States; Dr. Andreas Nygren, IPG Automotive Sweden AB, Sweden
BRAKE.TECH SECTION
–
Fürstensalon
Session:
SIMULATION AND TESTING
A novel simulator setup: combining full FTire dynamics with highly accurate steering feel emulation
Dr. Benjamin Rieff
Real-Time Solutions Architect, cosin scientific software AG, Germany
Coauthors: Kilian Joerg, Matthias Becker, Korbinian Thaler, MdynamiX AG, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRE TESTING AND SIMULATION
AI and 5G for CCAM – the case of a roundabout
Prof. Dr. Giampiero Mastinu
Full Professor, Department of Mechanical Engineering, Politecnico di Milano, Italy
Coauthors: Dr. Lorenzo Uccello, Prof. Dr. Giorgio Previati, Department of Mechanical Engineering, Politecnico di Milano, Italy; Dr. Antonino Albanese, Italtel S.p.A., Italy; Dr. Alessandro Roccasalva, TECH – CRF S.C.p.A., Italy; Dr. Gabriele Santin, Dr. Massimiliano Luca, Prof. Dr. Bruno Lepri, Dr. Laura Ferrarotti, Fondazione Bruno Kessler, Italy; Nicola di Pietro, Athonet Italy
CHASSIS.TECH SECTION
–
Palaishalle
Session:
ARTIFICIAL INTELLIGENCE
Driving simulator study on the acceptance of take-over concepts of a steer-by-wire functionality
Hendryk Lausch
Research Associate 3F-Methodology, SiL & HiL, Institute of Automotive Engineering (IfF), Technical University of Braunschweig, Germany
Coauthors: Tim Ahrenhold, Prof. Dr. Roman Henze, Institute of Automotive Engineering (IfF), Technical University of Braunschweig, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
DEVELOPMENT PROCESS AND STANDARDIZATION
Validation gap between hardware- and software-in-the-loop brake system simulation
Anton Tworek
Development Engineer Test Systems, MdynamiX AG, Germany
Coauthors: Raphael Groß, Prof. Dr. Peter E. Pfeffer, Automotive Engineering, Hochschule München University of Applied Sciences, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
SIMULATION AND TESTING
Virtual investigation of tire-vehicle handling performance using outdoor and indoor tire characteristics
Dr. Konstantin Sedlan
Senior Specialist Chassis Development & Simulation, Volkswagen AG, Germany
Dr. Christian Cramer
Senior Engineer Vehicle Dynamics Testing & Simulation, Continental Reifen Deutschland GmbH, Germany
Coauthors: Carsten Schröder, Dr. Heiko Clasen, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
TIRE TESTING AND SIMULATION
Lunch in the exhibition area
to
CHASSIS.TECH SECTION − Palaishalle
CHASSIS CONTROL
Moderation
Timo Schöning
Head of Department Test, Hyundai Motor Europe Technical Center GmbH, Germany
to
STEERING.TECH SECTION − Festsaal
REQUIREMENTS AND EVALUATION
Moderation
Bertram Möller
R&D Director EMEASA & Managing Director, Nexteer Automotive Germany GmbH, Germany
to
BRAKE.TECH SECTION − Fürstensalon
BRAKE EMISSIONS
Moderation
Prof. Dr. Ralph Mayer
Head of Professorship Vehicle Systems Design, Chemnitz University of Technology, Germany
to
TIRE.WHEEL.TECH SECTION − Königssaal
INNOVATIONS IN TIRES AND WHEELS
Moderation
Stefan Dittmar
Head of Wheels, TÜV SÜD Product Service GmbH, Germany
A study of roll angle control based on a passenger comfort index
Masayoshi Kimura
Technical Manager, Research and Development, Astemo Europe GmbH, Germany
Coauthors: Yasuyuki Tanabe, Hiroo Teruuchi, Hitachi Astemo, Ltd., Japan
CHASSIS.TECH SECTION
–
Palaishalle
Session:
CHASSIS CONTROL
Subjective and objective evaluation of steering feel on a steering HiL test bench
Alexander Haas
Development Engineer Steering Systems, Dr. Ing. h.c. F. Porsche AG, Germany
Coauthors: Gregor Menze, Dr. Christoph Bittner, Pascal von Kamp, Dr. Ing. h.c. F. Porsche AG, Germany; Prof. Dr. Dr. Dieter Schramm, Chair of Mechatronics, University of Duisburg-Essen, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
REQUIREMENTS AND EVALUATION
Influence of powertrain electrification on brake wear particle emissions
Dr. Toni Feißel
Systems Engineer, IAV GmbH, Germany
Coauthors: Mirco Augustin, IAV GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE EMISSIONS
Development and manufacturing of aluminium wheels with low carbon footprint alloys
Claudio Sorlini
Product Engineering Director, Cromodora Wheels S.p.A., Italy
Coauthors: Marco Losio, Roberto Frizzi, Cromodora Wheels S.p.A., Italy
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
INNOVATIONS IN TIRES AND WHEELS
Development of integrated chassis control systems in a DiL environment
Javier Gutierrez
Product Coordinator, Vehicle Dynamics, IDIADA Automotive Technology S.A., Spain
Coauthors: Guido Tosolin, Jaume Cartró Benavides, Oriol Sala, IDIADA Automotive Technology, S.A., Spain
CHASSIS.TECH SECTION
–
Palaishalle
Session:
CHASSIS CONTROL
Power supply requirements for a steer-by-wire system
Götz-Philipp Wegner
SW Functional Safety Engineer Steering Systems, Ford-Werke GmbH, Germany
Coauthors: Alexander Ein Waldt, Dennis Kurzweil, Ford-Werke GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session:
REQUIREMENTS AND EVALUATION
A methodology for emulating the WLTP brake cycle on public roads
Boris Angelike
Project Manager CoC Brake System, EDAG Engineering GmbH, Germany
Coauthors: Dr. Dominic Jekel, EDAG Engineering GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE EMISSIONS
Anti-lock brake system (ABS) enhancement with intelligent tires
Dr. Seyed Amin Sajadi Alamdari
Senior Research Engineer, Intelligent Tire Group, The Goodyear Tire & Rubber Company, Luxembourg
Coauthors: Kanwar Bharat Singh, The Goodyear Tire & Rubber Company, Luxembourg; Ron Wouters, Yuri Tielman, Integrated Vehicle Safety Department, Netherlands Organization for Applied Scientific Research (TNO), Netherlands
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
INNOVATIONS IN TIRES AND WHEELS
ABS next generation – nonlinear model-based slip estimation and control
Bianka Weber
Expert Vehicle Dynamics Management, Bosch Engineering GmbH, Germany
Michele Sigilló
Founder, SIGICONTROL s.r.o., Czech Republic
Coauthors: Marco Mohl, Johannes Boes, Dr. Lars König, Bosch Engineering GmbH, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session:
CHASSIS CONTROL
Centralized steering functions for the software-defined vehicle
Michael Story
Engineering Manager R&D Software and Electrical Application, Nexteer Automotive Corp., United States
STEERING.TECH SECTION
–
Festsaal
Session:
REQUIREMENTS AND EVALUATION
Research of a long-life brake disk manufactured using a forming process
Falko Wagner
Research Assistant, Vehicle System Design, Chemnitz University of Technology, Germany
Coauthors: Prof. Dr. Ralph Mayer, Vehicle System Design, Chemnitz University of Technology, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session:
BRAKE EMISSIONS
Challenges and opportunities of intelligent tires to support vehicle performance and services
Dr. Timur Yilkiran
Senior Engineer Tire Development, Continental Reifen Deutschland GmbH, Germany
Coauthors: Prof. Dr. Burkhard Wies, Dr. Christian Lerner, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session:
INNOVATIONS IN TIRES AND WHEELS
Refreshment break with coffee and tea in the exhibition area
to
CHASSIS.TECH PLUS SECTION − Festsaal
KEYNOTE LECTURES III
Moderation
Prof. Dr. Peter E. Pfeffer
Automotive Engineering, Hochschule München University of Applied Sciences, Germany
Keynote Speech
ZF cubiX® – software solution for centralized vehicle motion control in SdV
Coauthors: Dr. Christoph Elbers, André Engelke, Dr. Caspar Lovell, ZF Friedrichshafen AG, Germany
CHASSIS.TECH PLUS SECTION
–
Festsaal
Session:
KEYNOTE LECTURES III
Keynote Speech
Consequences of decarbonization targets and sustainability on chassis development for OEMs in South America
Dr. Thomas Kersten
Director, Chassis, ADAS, Powertrain Development, Volkswagen do Brasil, Brazil
Coauthors: Roger Guilherme, Victor Machado, Volkswagen do Brasil, Brazil
CHASSIS.TECH PLUS SECTION
–
Festsaal
Session:
KEYNOTE LECTURES III
CHASSIS.TECH PLUS SECTION − Festsaal
CLOSING REMARKS
Prof. Dr. Peter E. Pfeffer
Automotive Engineering, Hochschule München University of Applied Sciences, Germany
Dr. Alexander Heintzel
Editor-in-Chief ATZ | MTZ Group, Editor-in-Chief ATZ | MTZ Group, Springer Nature, Germany
to
CHASSIS.TECH SECTION − Palaishalle
DRIVING SIMULATORS
Dr. Alexander Heintzel
Editor-in-Chief ATZ | MTZ Group, Editor-in-Chief ATZ | MTZ Group, Springer Nature, Germany
Comparison of real-time capable multi-body simulation models and map models on the dynamic driving simulator
Robert Schurmann
Simulation Engineer Wheel Guidance System and Vertical Dynamics, Volkswagen AG, Germany
Coauthors: Nils Harendza, TRE GmbH, Germany; Benjamin Rieff, cosin scientific software AG, Germany; Prof. Dr. Alexander Lion, Institute of Mechanics, Universität der Bundeswehr München, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session: DRIVING SIMULATORS
Virtual scene generation: developing, testing, and validating autonomous vehicle functions
Tim Rothmann
Senior Scientist, Dynamics, Loads, and Environmental Data, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
Coauthors: Jürgen Frank, Dr. Johannes Schwank, Dr. Michael Burger, Fraunhofer Institute for Industrial Mathematics (ITWM), Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session: DRIVING SIMULATORS
Driver-centric development leveraging on remotized hardware-in-the-loop and dynamic simulators
Lecture was cancelled at short notice. Please attend one of the parallel strands.
Alessio Anticaglia
PhD Student, Meccanica 42 S.r.l., Italy
Coauthors: Claudio Annicchiarico, Meccanica 42 S.r.l., Italy; Giuseppe Massimiliano Raimondi, Andrea Spicuglia, Maserati S.p.A., Italy; Alessandro Baldari, VI-grade S.r.l., Italy; Renzo Capitani, DIEF, University of Florence, Italy
CHASSIS.TECH SECTION
–
Palaishalle
Session: DRIVING SIMULATORS
to
STEERING.TECH SECTION − Festsaal
INNOVATIVE STEERING SYSTEMS
Moderation
Alternative HMI's in steer-by-wire vehicles
Thomas Maier
Test Engineer Vehicle Dynamics & Testing, thyssenkrupp Presta AG, Liechtenstein
STEERING.TECH SECTION
–
Festsaal
Session: INNOVATIVE STEERING SYSTEMS
Presentation of a steer-by-wire force feedback actuator with a direct drive e-motor and MR brake
Matthias Niegl
Senior Engineer, Vehicle Dynamics, MdynamiX AG, Germany
Coauthors: Johannes Hendewerk, MdynamiX AG, Germany; Matthias Becker, CC Vehicle Dynamics, Hochschule Münnchen University of Applied Sciences, Germany; Stefan Battlogg, INVENTUS Development GmbH, Austria; Matthias Holzleitner, STIWA Group, Austria
STEERING.TECH SECTION
–
Festsaal
Session: INNOVATIVE STEERING SYSTEMS
Conception and prototypical implementation of an integral steering and drive module
Torben Dittmar
Managing Chief Engineer, Institute for Automotive Engineering (ika), RWTH Aachen University, Germany
Coauthors: Prof. Dr. Lutz Eckstein, Institute for Automotive Engineering (ika), RWTH Aachen University, Germany
STEERING.TECH SECTION
–
Festsaal
Session: INNOVATIVE STEERING SYSTEMS
to
BRAKE.TECH SECTION − Fürstensalon
BRAKE SYSTEMS AND CONTROL
Moderation
Dr. Falk Hecker
Vice President Engineering Brake Control, Knorr-Bremse Commercial Vehicle Systems GmbH, Germany
Roadmap to act-by-wire
Dr. Michael Kunz
Vice President Engineering Platform Brake System and Software, Robert Bosch GmbH, Germany
Dr. Dominic Neumann
Senior Project Lead, Robert Bosch Automotive Steering GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE SYSTEMS AND CONTROL
Electromechanical brake systems – architectures and applications
Martin Baechle
Director System Development Future Brake Systems, Continental Automotive Technologies GmbH, Germany
Coauthors: Timo Schröder, Dr. Mathias Haag, Dr. Thorsten Ullrich, Continental Automotive Technologies GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE SYSTEMS AND CONTROL
ABS exploiting forces at the wheel – a motorsport investigation
Prof. Dr. Giampiero Mastinu
Full Professor, Department of Mechanical Engineering, Politecnico di Milano, Italy
Coauthors: Prof. Massimiliano Gobbi, Massimiliano Milivinti, Department of Mechanical Engineering, Politecnico di Milano, Italy; Carlo Cantoni, Brembo S.p.A., Italy
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE SYSTEMS AND CONTROL
to
TIRE.WHEEL.TECH SECTION − Königssaal
TIRES AND WHEELS AND THE ENVIRONMENT
Moderation
Ralf Schweizer
Head of Development Wheels, Tires, Tire Pressure Monitoring Systems, AUDI AG, Germany
Wheel sustainability and performance label
Coauthors: Iosef Fanizza, Ralf Duning, Maxion Wheels Holding GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRES AND WHEELS AND THE ENVIRONMENT
Analysis of airborne and non-airborne tire road wear particles generated by a vehicle
Frédéric Biesse
Senior Fellow for Tire Physics and Modelization, Manufacture Française des Pneumatiques Michelin, France
Coauthors: Pierre Schaal, Manufacture Française des Pneumatiques Michelin, France
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRES AND WHEELS AND THE ENVIRONMENT
Tire wear particle evaluation
Dr. Benjamin Oelze
Head of Test Method Development Tire Wear, Continental Reifen Deutschland GmbH, Germany
Nadine Aschenbrenner
Test Engineer – Global Tire Testing, Wear, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRES AND WHEELS AND THE ENVIRONMENT
Refreshment break with coffee and tea in the exhibition area
to
CHASSIS.TECH SECTION − Palaishalle
ARTIFICIAL INTELLIGENCE
Moderation
Martin Schwarz
Head of Development Steering Gear Upper Midsize Class, Luxury Class, Rear Axle Steering, BMW Group, Germany
Exploring the limits of driving stability using reinforcement learning for vehicle dynamics simulation
Dr. Mark Wielitzka
Senior Technical Consultant Software & Function Development, IAV GmbH, Germany
Coauthors: Markus Knaup, IAV GmbH, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session: ARTIFICIAL INTELLIGENCE
Innovative kinematic metamodeling: pioneering AI-enhanced suspension tolerance analysis
Alexander Großberger
Research Assistant Virtual Chassis Development, Chair of Automobile Engineering, Dresden Institute of Automobile Engineering, TU Dresden, Germany
Coauthors: Prof. Dr. Günther Prokop, Chair of Automobile Engineering, TU Dresden, Germany; Dr. Maximilian Reisner, AUDI AG, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session: ARTIFICIAL INTELLIGENCE
AI and 5G for CCAM – the case of a roundabout
Prof. Dr. Giampiero Mastinu
Full Professor, Department of Mechanical Engineering, Politecnico di Milano, Italy
Coauthors: Dr. Lorenzo Uccello, Prof. Dr. Giorgio Previati, Department of Mechanical Engineering, Politecnico di Milano, Italy; Dr. Antonino Albanese, Italtel S.p.A., Italy; Dr. Alessandro Roccasalva, TECH – CRF S.C.p.A., Italy; Dr. Gabriele Santin, Dr. Massimiliano Luca, Prof. Dr. Bruno Lepri, Dr. Laura Ferrarotti, Fondazione Bruno Kessler, Italy; Nicola di Pietro, Athonet Italy
CHASSIS.TECH SECTION
–
Palaishalle
Session: ARTIFICIAL INTELLIGENCE
to
STEERING.TECH SECTION − Festsaal
DEVELOPMENT PROCESS AND STANDARDIZATION
Moderation
Dr. Christoph Bittner
Director Development Vehicle Dynamics Systems, Dr. Ing. h.c. F. Porsche AG, Germany
Standardization for a steer-by-wire vehicle
Alexander Ein Waldt
Technical Expert Steering Systems, Ford-Werke GmbH, Germany
Coauthors: Götz-Philipp Wegner, Oliver Nehls, Ford-Werke GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session: DEVELOPMENT PROCESS AND STANDARDIZATION
SbW development of safety & steering performance avoiding unintended interference
Carsten Maziul
SbW Lead Project Manager, ZF Active Safety GmbH, Germany
Coauthors: Dr. Emad Farshizadeh, ZF Active Safety GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session: DEVELOPMENT PROCESS AND STANDARDIZATION
Driving simulator study on the acceptance of take-over concepts of a steer-by-wire functionality
Hendryk Lausch
Research Associate 3F-Methodology, SiL & HiL, Institute of Automotive Engineering (IfF), Technical University of Braunschweig, Germany
Coauthors: Tim Ahrenhold, Prof. Dr. Roman Henze, Institute of Automotive Engineering (IfF), Technical University of Braunschweig, Germany
STEERING.TECH SECTION
–
Festsaal
Session: DEVELOPMENT PROCESS AND STANDARDIZATION
to
BRAKE.TECH SECTION − Fürstensalon
SIMULATION AND TESTING
Moderation
Prof. Dr. Rüdiger Tiemann
Head of Chassis and Vehicle Dynamics, Automotive Engineering, htw saar – University of Applied Sciences, Germany
Implementation of a real-time ESC simulation environment into a dynamic driving simulator (SiL/DiL)
sangmin Park
Principal Investigator Dynamics Concept Development Team, Hyundai Motor Company, South Korea
Coauthors: Matthias Niegl, Tobias Tarne, MdynamiX AG, Germany; Prof. Bernhard Schick, Institute for Driver Assistance and Connected Mobility (IFM), Kempten University of Applied Sciences, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: SIMULATION AND TESTING
Better together! New testing methodologies for innovative brake systems – applications and benefits
Dr. Felix Pfister
Business Development Manager, IPG Automotive GmbH, Germany
Coauthors: Dr. Matthijs Klomp, Dr. Alessandro Travagliati, Lorenzo Savi, Volvo Car Corporation, Sweden; Barry Purtymun, Carlos Ernesto Agudelo, LINK Group, United States; Dr. Andreas Nygren, IPG Automotive Sweden AB, Sweden
BRAKE.TECH SECTION
–
Fürstensalon
Session: SIMULATION AND TESTING
Validation gap between hardware- and software-in-the-loop brake system simulation
Anton Tworek
Development Engineer Test Systems, MdynamiX AG, Germany
Coauthors: Raphael Groß, Prof. Dr. Peter E. Pfeffer, Automotive Engineering, Hochschule München University of Applied Sciences, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: SIMULATION AND TESTING
to
TIRE.WHEEL.TECH SECTION − Königssaal
TIRE TESTING AND SIMULATION
Moderation
Prof. Dr. Andreas Wagner
Holder of the Chair of Automotive Engineering, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany
Influence of tire deformation on vehicle aerodynamics
Johannes Burgbacher
Research Associate, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany
Coauthors: Prof. Dr. Andreas Wagner, Institute of Automotive Engineering Stuttgart (IFS), University of Stuttgart, Germany; Dr. Timo Kuthada, Dr. Felix Wittmeier, Research Institute for Automotive Engineering and Powertrain Systems Stuttgart (FKFS), Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRE TESTING AND SIMULATION
A novel simulator setup: combining full FTire dynamics with highly accurate steering feel emulation
Dr. Benjamin Rieff
Real-Time Solutions Architect, cosin scientific software AG, Germany
Coauthors: Kilian Joerg, Matthias Becker, Korbinian Thaler, MdynamiX AG, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRE TESTING AND SIMULATION
Virtual investigation of tire-vehicle handling performance using outdoor and indoor tire characteristics
Dr. Konstantin Sedlan
Senior Specialist Chassis Development & Simulation, Volkswagen AG, Germany
Dr. Christian Cramer
Senior Engineer Vehicle Dynamics Testing & Simulation, Continental Reifen Deutschland GmbH, Germany
Coauthors: Carsten Schröder, Dr. Heiko Clasen, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: TIRE TESTING AND SIMULATION
Lunch in the exhibition area
to
CHASSIS.TECH SECTION − Palaishalle
CHASSIS CONTROL
Moderation
Timo Schöning
Head of Department Test, Hyundai Motor Europe Technical Center GmbH, Germany
A study of roll angle control based on a passenger comfort index
Masayoshi Kimura
Technical Manager, Research and Development, Astemo Europe GmbH, Germany
Coauthors: Yasuyuki Tanabe, Hiroo Teruuchi, Hitachi Astemo, Ltd., Japan
CHASSIS.TECH SECTION
–
Palaishalle
Session: CHASSIS CONTROL
Development of integrated chassis control systems in a DiL environment
Javier Gutierrez
Product Coordinator, Vehicle Dynamics, IDIADA Automotive Technology S.A., Spain
Coauthors: Guido Tosolin, Jaume Cartró Benavides, Oriol Sala, IDIADA Automotive Technology, S.A., Spain
CHASSIS.TECH SECTION
–
Palaishalle
Session: CHASSIS CONTROL
ABS next generation – nonlinear model-based slip estimation and control
Bianka Weber
Expert Vehicle Dynamics Management, Bosch Engineering GmbH, Germany
Michele Sigilló
Founder, SIGICONTROL s.r.o., Czech Republic
Coauthors: Marco Mohl, Johannes Boes, Dr. Lars König, Bosch Engineering GmbH, Germany
CHASSIS.TECH SECTION
–
Palaishalle
Session: CHASSIS CONTROL
to
STEERING.TECH SECTION − Festsaal
REQUIREMENTS AND EVALUATION
Moderation
Bertram Möller
R&D Director EMEASA & Managing Director, Nexteer Automotive Germany GmbH, Germany
Subjective and objective evaluation of steering feel on a steering HiL test bench
Alexander Haas
Development Engineer Steering Systems, Dr. Ing. h.c. F. Porsche AG, Germany
Coauthors: Gregor Menze, Dr. Christoph Bittner, Pascal von Kamp, Dr. Ing. h.c. F. Porsche AG, Germany; Prof. Dr. Dr. Dieter Schramm, Chair of Mechatronics, University of Duisburg-Essen, Germany
STEERING.TECH SECTION
–
Festsaal
Session: REQUIREMENTS AND EVALUATION
Power supply requirements for a steer-by-wire system
Götz-Philipp Wegner
SW Functional Safety Engineer Steering Systems, Ford-Werke GmbH, Germany
Coauthors: Alexander Ein Waldt, Dennis Kurzweil, Ford-Werke GmbH, Germany
STEERING.TECH SECTION
–
Festsaal
Session: REQUIREMENTS AND EVALUATION
Centralized steering functions for the software-defined vehicle
Michael Story
Engineering Manager R&D Software and Electrical Application, Nexteer Automotive Corp., United States
STEERING.TECH SECTION
–
Festsaal
Session: REQUIREMENTS AND EVALUATION
to
BRAKE.TECH SECTION − Fürstensalon
BRAKE EMISSIONS
Moderation
Prof. Dr. Ralph Mayer
Head of Professorship Vehicle Systems Design, Chemnitz University of Technology, Germany
Influence of powertrain electrification on brake wear particle emissions
Dr. Toni Feißel
Systems Engineer, IAV GmbH, Germany
Coauthors: Mirco Augustin, IAV GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE EMISSIONS
A methodology for emulating the WLTP brake cycle on public roads
Boris Angelike
Project Manager CoC Brake System, EDAG Engineering GmbH, Germany
Coauthors: Dr. Dominic Jekel, EDAG Engineering GmbH, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE EMISSIONS
Research of a long-life brake disk manufactured using a forming process
Falko Wagner
Research Assistant, Vehicle System Design, Chemnitz University of Technology, Germany
Coauthors: Prof. Dr. Ralph Mayer, Vehicle System Design, Chemnitz University of Technology, Germany
BRAKE.TECH SECTION
–
Fürstensalon
Session: BRAKE EMISSIONS
to
TIRE.WHEEL.TECH SECTION − Königssaal
INNOVATIONS IN TIRES AND WHEELS
Moderation
Stefan Dittmar
Head of Wheels, TÜV SÜD Product Service GmbH, Germany
Development and manufacturing of aluminium wheels with low carbon footprint alloys
Claudio Sorlini
Product Engineering Director, Cromodora Wheels S.p.A., Italy
Coauthors: Marco Losio, Roberto Frizzi, Cromodora Wheels S.p.A., Italy
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: INNOVATIONS IN TIRES AND WHEELS
Anti-lock brake system (ABS) enhancement with intelligent tires
Dr. Seyed Amin Sajadi Alamdari
Senior Research Engineer, Intelligent Tire Group, The Goodyear Tire & Rubber Company, Luxembourg
Coauthors: Kanwar Bharat Singh, The Goodyear Tire & Rubber Company, Luxembourg; Ron Wouters, Yuri Tielman, Integrated Vehicle Safety Department, Netherlands Organization for Applied Scientific Research (TNO), Netherlands
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: INNOVATIONS IN TIRES AND WHEELS
Challenges and opportunities of intelligent tires to support vehicle performance and services
Dr. Timur Yilkiran
Senior Engineer Tire Development, Continental Reifen Deutschland GmbH, Germany
Coauthors: Prof. Dr. Burkhard Wies, Dr. Christian Lerner, Continental Reifen Deutschland GmbH, Germany
TIRE.WHEEL.TECH SECTION
–
Königssaal
Session: INNOVATIONS IN TIRES AND WHEELS
Refreshment break with coffee and tea in the exhibition area
to
CHASSIS.TECH PLUS SECTION − Festsaal
KEYNOTE LECTURES III
Moderation
Prof. Dr. Peter E. Pfeffer
Automotive Engineering, Hochschule München University of Applied Sciences, Germany
Keynote Speech
ZF cubiX® – software solution for centralized vehicle motion control in SdV
Coauthors: Dr. Christoph Elbers, André Engelke, Dr. Caspar Lovell, ZF Friedrichshafen AG, Germany
CHASSIS.TECH PLUS SECTION
–
Festsaal
Session: KEYNOTE LECTURES III
Keynote Speech
Consequences of decarbonization targets and sustainability on chassis development for OEMs in South America
Dr. Thomas Kersten
Director, Chassis, ADAS, Powertrain Development, Volkswagen do Brasil, Brazil
Coauthors: Roger Guilherme, Victor Machado, Volkswagen do Brasil, Brazil
CHASSIS.TECH PLUS SECTION
–
Festsaal
Session: KEYNOTE LECTURES III
CHASSIS.TECH PLUS SECTION − Festsaal
CLOSING REMARKS
Prof. Dr. Peter E. Pfeffer
Automotive Engineering, Hochschule München University of Applied Sciences, Germany
Dr. Alexander Heintzel
Editor-in-Chief ATZ | MTZ Group, Editor-in-Chief ATZ | MTZ Group, Springer Nature, Germany